Electrolux EW6F4842AB Manuel d'utilisateur

EW6F4842ABEN Washing Machine User Manual

5. CONTROL PANEL5.1 Special featuresYour new washing machine meets allmodern requirements for an effectivetreatment of laundry with low water,energy a

5.3 DisplayA B C DEFGA Door locked indicator.B Delay start indicator.C The digital indicator can show:• Programme duration (e. g. ).• Delay time (e.

6. DIAL AND BUTTONS6.1 IntroductionThe options/functions arenot available with allwashing programmes.Check the compatibilitybetween options/functionsa

containing sand, dust, mud and othersolid particles.These options can increasethe programme duration.6.6 Permanent Extra Rinse With this option you ca

7. PROGRAMMES7.1 Programme ChartProgrammeDefault tem‐peratureTemperaturerangeMaximumspinspeedSpinspeedrange[rpm ]Maxi‐mumloadProgramme description(Typ

ProgrammeDefault tem‐peratureTemperaturerangeMaximumspinspeedSpinspeedrange[rpm ]Maxi‐mumloadProgramme description(Type of load and soil level)Duvet40

ProgrammeDefault tem‐peratureTemperaturerangeMaximumspinspeedSpinspeedrange[rpm ]Maxi‐mumloadProgramme description(Type of load and soil level)Outdoor

ProgrammeDefault tem‐peratureTemperaturerangeMaximumspinspeedSpinspeedrange[rpm ]Maxi‐mumloadProgramme description(Type of load and soil level)Denim30

ProgrammeSpinPrewashExtra RinseSoft PlusDelay StartTime ManagerWool Sport Outdoor Denim

The Child Lock function may not beavailable for a few seconds afterswitching the appliance on.9. BEFORE FIRST USE1. Make sure that the electrical powe

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

10.3 Filling the detergent and additivesCompartment for prewashphase, soak programme or stainremover.Compartment for washingphase.Compartment for liqu

Make sure that the flap does not cause ablockage when you close the drawer.10.5 Setting a programme1. Turn the programme dial to select thedesired was

2. After about 15-20 minutes the TimeManager bars disappear and newcycle duration is displayed.The appliance automatically adjuststhe programme durati

10.13 Draining water out afterend of cycleIf you have chosen a programme or anoption that does not empty out the waterof the last rinse, the programme

a. interrupt the programme andopen the door (refer to "DailyUse" chapter);b. manually redistribute the load sothat the items are spaced even

12.2 DescalingIf the water hardness in yourarea is high or moderate, werecommend that you use awater descaling product forwashing machines.Regularly e

3. Make sure that all detergent residueis removed from the upper and lowerpart of the recess. Use a small brushto clean the recess.4. Insert the deter

Proceed as follows to clean the pump:1.122.3.180˚4.215. 6.7.218.211WARNING!Make sure that the impeller of the pump can rotate. If it does not rotate,c

12.8 Cleaning the inlet hose and the valve filter31245°20°12.9 Emergency drainIf the appliance cannot drain the water,carry out the same procedure, de

Pause button may flashcontinuously:• - The appliance does not fillwith water properly. Start theappliance again by pressing Start/Pause button. Af

1. SAFETY INFORMATIONBefore the installation and use of the appliance, carefullyread the supplied instructions. The manufacturer is notresponsible f

Problem Possible solutionThe appliance does notfill with water properly.• Make sure that the water tap is open.• Make sure that the pressure of the wa

Problem Possible solutionThe appliance makesan unusual noise andvibrates.• Make sure the levelling of the appliance is correct. Referto "Installa

Programmes Load(kg)Energycon‐sumption(kWh)Watercon‐sumption(litre)Approxi‐mate pro‐grammeduration(minutes)Remain‐ing mois‐ture (%)1)Cotton 60°C 8 1,35

Energy Efficiency Class A+++Spin Speed Maximum 1400 rpm1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar).If

16.4 Available in www.electrolux.com/shop or from authoriseddealerOnly appropriate accessories approved by ELECTROLUX ensure thesafety standards of th

ENGLISH 35

www.electrolux.com/shop192937370-A-502017

• The operating water pressure at the water entry pointfrom the outlet connection must be between 0.5 bar(0.05 MPa) and 8 bar (0.8 MPa).• The ventilat

Service Centre to ensure whichaccessories can be used.2.2 Electrical connectionWARNING!Risk of fire and electricshock.• The appliance must be earthed.

for the disposal of Waste Electricaland Electronic Equipment (WEEE).3. INSTALLATIONWARNING!Refer to Safety chapters.3.1 Unpacking1. Remove the externa

7. Remove the three transit bolts and pull outthe plastic spacers.8. Put the plastic caps, that you find in theuser manual bag, in the holes.We recomm

3. If necessary, loosen the ring nut to setit in the correct position.4. Connect the water inlet hose to thecold water tap with 3/4'' thread

6. Position the hose directly to a built-indrain pipe in the room wall and tightenit with a clamp.3.3 Installation on suspendedflooringSuspended woode