Electrolux ESF45010 Manuel d'utilisateur télécharger pdf (Page 12)

12 electrolux first use

The water softener must be set in

both ways: manually, using the water

hardness dial and electronically, using

some of the programme buttons on

the control panel

Setting manually

The dishwasher is factory set at

position 2.

1. Open the dishwasher door.

2. Remove the lower basket from the

dishwasher.

3. Turn the water hardness dial to

position 1 or 2 (see table).

4. Replace the lower basket.

Setting electronically

The dishwasher is factory set at

level 5.

1. Press the On/Off button. The

dishwasher must be in setting

mode.

2. Press simultaneously and keep

pressed buttons 2 and 3, until the

lights of buttons 1, 2 and 3 start

flashing.

3. Press button 1, the lights of

buttons 2 and 3 turn off while the

light of the button 1 goes on

flashing, at the same time the end

of programme indicator light

starts to flash.

The current level is indicated by

the number of flashes of the end

of programme indicator light.

Examples:

5 flashes, pause, 5 flashes, pause,

etc... = level 5

6 flashes, pause, 6 flashes, pause,

etc... = level 6

4. To change the level, press function

button 1. Each time the button is

pressed the level changes. (For

the selection of the new level see

the chart).

Examples:

if the current level is 5, by pressing

function button 1 once, level 6 is

selected.

if the current level is 10, by

pressing function button 1 once,

level 1 is selected.

5. To memorise the operation, switch

off the dishwasher by pressing the

On/Off button.

117997 87/1en 2-05-2007 11:32 Pagina 12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 47 48

Commentaires sur ces manuels

Pas de commentaire