Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 12)

(MIN, MED or MAX) is shown in the dis-

play.

If the BELADING (LOAD) button is not press-

ed after an

Iron Aid programme is selec-

ted, then medium steam level (MED) is se-

lected automatically. If you select the

OP-

FRISSEN (REFRESH) programme, MIN is se-

lected automatically.

Important: If in doubt, always select a

lower steam level first until you have

more experience with load volumes, fab-

ric types and the corresponding opti-

mum steam level. If too high a steam

level is selected, garments may lose their

shape. If too low a steam level is selec-

ted, creases may remain.

Selecting additional functions

The additional functions available for the

Iron Aid programmes are ZOEMER (BUZ-

ZER), STARTUITSTEL (DELAY) and the

CHILD LOCK.

ZOEMER (BUZZER)

The appliance is supplied with the ZOEMER

(BUZZER)

function activated. When the

drying cycle has finished, an intermittent

acoustic signal will sound. Each time a button

is pressed or a programme is changed using

the programme knob, an audible signal is al-

so set to sound. The button is used to switch

the function on or off. When the function is

active, the ZOEMER (BUZZER)

symbol

appears in the display.

STARTUITSTEL (DELAY)

With the STARTUITSTEL (DELAY) but-

ton, you can delay the start of a pro-

gramme by between 30 minutes (

) and a maximum of 20

hours (

).

1. Select the programme and additional

functions.

2. Press the STARTUITSTEL (DELAY) but-

ton as many times as necessary until the

required start delay appears on the dis-

play, e.g.

if the pro-

gramme is to be started in 12 hours.

3. To activate the delay timer, press the

START/PAUZE button. The amount of

time remaining until the programme is set

to start is continuously displayed (e.g.

, ,

, … etc).

If the display is showing

and you press the button again, the

time delay will be cancelled. The display

will show

and then the duration of the

selected programme.

CHILD LOCK

The child lock can be set to prevent a pro-

gramme being accidentally started or a pro-

gramme in operation being accidentally

changed. The child safety device locks all

buttons and the programme knob. The child

safety device can be activated or deactivated

by holding down the ZOEMER (BUZZER) and

TIME (TIJD)buttons simultaneously for 5 sec-

onds.

• Before programme is started: Appliance

cannot be used

• After programme is started: Programme in

operation cannot be changed

The symbol

appears in the display to in-

dicate that the child safety device is activa-

ted. The child safety device is not deactivated

once the programme comes to an end. If you

want to set a new programme, you must first

deactivate the child safety device.

12 electrolux

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Commentaires sur ces manuels

Pas de commentaire