Electrolux EWG147410W Manuel d'utilisateur télécharger pdf (Page 7)

DISPLAY

7.4 7.5 7.1

7.27.3

The display shows the following informa-

tion:

7.1:

•

Duration of the selected programme

After selecting a programme, the duration

is displayed in hours and minutes (for ex-

ample 2.05 ). The duration is calculated

automatically on the basis of the maxi-

mum recommended load for each type of

fabric. After the programme has started,

the time remaining is updated every mi-

nute.

• Delayed start

The Selected delay set by pressing the

relevant button appears on the display for

a few seconds, then the duration of the

selected programme is displayed again.

• Alarm codes

In the event of operating problems, some

alarm codes can be displayed, for exam-

ple E20 (see paragraph «What to do

if...»).

• Incorrect option selection

If an option which is not compatible with

the set wash programme is selected, the

message Err is displayed at the bottom

of the display for a few seconds and the

integrated red light of button 8 start flash-

ing.

• End of programme

When the programme has finished three

flashing zeros are displayed, the pilot light

9 and the pilot light of button 8 go out

and the door can be opened.

7.2: Washing programme phase icons

•

Wash

•

Rinses

•

Drain

•

Spin

By selecting the wash programme, the pro-

gramme phase icons corresponding to the

various phases making up the programme

are shown in the bottom part of the display.

After having pressed button 8 only the icon

of the running phase stays on.

7.3: Heating phase

During the washing cycle the display shows

a temperature icon indicating that the appli-

ance has started the heating phase of the

water in the tub.

7.4: Soil degree icons

When selecting a programme on the dis-

play appears an icon indicating the degree

of soiling automatically proposed by the

machine:

•

Intensive

•

Normal/Daily

•

Light/Quick

•

Super Quick

7.5: Child safety lock

This device permits you to leave the appli-

ance unattended during it's functioning.

ACOUSTIC SIGNALS

The machine is provided with an acoustic

device, which sounds in the following ca-

ses:

• at the end of the cycle

• if there is a fault.

By pressing the 4 and 5 buttons simultane-

ously for about 6 seconds, the acoustic

signal is deactivated (except if there is a

electrolux 7

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Commentaires sur ces manuels

Pas de commentaire