Electrolux EWG147410W Manuel d'utilisateur télécharger pdf (Page 28)

Fig. 3

Ø 35 mm

14 mm

16-22 mm

22±1,5 mm

416

mm

X

595-598 mm

b) Hinges

To mount the hinges it is necessary to drill

two holes (dia. 35 mm, depth 12.5-14 mm

depending on the depth of door furniture)

on the inner side of the door. The distance

between the holes hobs fixing centres must

be 416 mm.

The distance from upper edge of the door

to the centre of the hole depends on the

adjacent furniture's dimensions.

The hinges will be fixed to the door by

means of screws for wood 1 and 2 (Fig. 4)

supplied with the appliance.

Fig. 4

1

2

c) Mounting the door

Fix the hinges to the appliance by means of

the M5x15 screws. The hinges can be ad-

justed to compensate for possible uneven

thickness of the door.

To align the door perfectly it is necessary to

loosen the screw, adjust the door and tight-

en the screw A again (Fig. 5).

Warning! Do not remove the screw B

(Fig. 5).

Fig. 5

B

A

d) Counter-magnet

The appliance is prearranged for a magnet-

ic closure of the door.

To enable a correct operation of this device,

it is necessary to screw the counter-magnet

A (steel disk + rubber ring) into the inner

side of the door. Its position must corre-

spond to the magnet B on the appliance

(Fig. 6).

Warning! Do not remove the screw C.

Fig. 6

A

B

C

If the door has to be opened from left to

right, invert the position of the plates E, the

magnet D and the plate C. Mount the

counter-magnet D and the hinges A as pre-

viously described (Fig. 7).

Warning! Do not remove the screw B.

28 electrolux

1 2 ... 23 24 25 26 27 28 29 30 31 32

Commentaires sur ces manuels

Pas de commentaire