Electrolux WASL2E300 Manuel d'utilisateur télécharger pdf (Page 36)

11. Put the filter back into the special

guides by turning it clockwise. Make

sure that you tighten the filter

correctly to prevent leakages.

12. Close the pump cover.

When you drain the water with the

emergency drain procedure, you must

activate the drain system again:

a. Put 2 litres of water in the main

wash compartment of the

detergent dispenser.

b. Start the programme to drain the

water.

13.8 Cleaning the inlet hose

and the valve filter

It is recommended to clean both the

filters of the inlet hose and valve

occasionally to remove any deposit,

collected over the time:

1. Remove the inlet hose from the tap

and clean the filter.

2. Remove the inlet hose from the

appliance by loosening the ring nut.

3. Clean the valve filter on the back of

the appliance with a toothbrush.

4. When you reconnect the hose to the

back of the appliance, turn it left or

right (not in vertical position)

www.electrolux.com36

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 47 48

Pas de commentaire

Electrolux WASL2E300 Manuel d'utilisateur Page 36