Electrolux EBGL7SP Manuel d'utilisateur télécharger pdf (Page 11)

Heating function Application

13

Half Steam +

Heat

For dishes with a high moisture content and for

poaching fish, custard royale and terrines.

14

Full Steam For vegetables, fish, potatoes, rice, pasta or spe-

cial side dishes.

6.1 Setting the heating function

1.

Touch . The display shows a sym-

bol, the number of the heating func-

tion and the preset temperature.

2.

Touch or to set a heating

function.

3.

Touch or the appliance starts au-

tomatically after five seconds.

If you activate the appliance with

and do not set a heating func-

tion or programme, the appliance

deactivates automatically after 20

seconds.

6.2 Changing the temperature

Touch or to change the tempera-

ture in steps of 5 °C.

When the appliance is at the set tempera-

ture, an acoustic signal sounds three

times. The heat-up indicator goes off the

display.

6.3 Checking the temperature

You can see the temperature in the appli-

ance when the function or programme

operates.

1.

Touch .

The Temperature / Time display

shows the temperature in the appli-

ance.

2.

Touch to go back to the set tem-

perature. If not, the display shows it

automatically after five seconds.

6.4 Fast Heat Up function

The Fast Heat Up function decreases the

heat up time.

Activating the Fast Heat Up function:

Activate a heating function. Touch and

hold

for more than three seconds.

When you activate the Fast Heat Up func-

tion, the bars on the display

flash one

by one to show that the function operates

and

appears on the display.

Useful information

• The Fast heat up is not available with

every oven function. An acoustic signal

sounds if the Fast heat up is not availa-

ble for the set function if Faulty tone is

activated in the “Settings menu”.

6.5 Steam cooking

The water drawer cover is in the control

panel.

1.

Press the cover to open the water

drawer.

2.

Fill the water drawer with 700 ml of

water.

The water supply is sufficient for ap-

proximately 50 minutes.

Do not put water directly into the

steam generator!

Use only water as the liquid. Do

not use filtered (demineralised) or

distilled water.

3.

Activate the appliance.

4.

Set the steam heating function and

temperature.

5.

If necessary, set the DURATION or

END

function (refer to "Setting the

END" or "Setting the DURATION").

The first steam shows after approxi-

mately 2 minutes. An acoustic signal

sounds when the appliance is at ap-

proximately the set temperature.

The signal sounds again at the end of

the cooking time.

6.

Touch to deactivate the acoustic

signal and the appliance.

When the steam generator is

empty, an acoustic signal sounds.

When the appliance cools down, soak up

all remaining water from the steam gener-

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Commentaires sur ces manuels

Pas de commentaire