Electrolux EIV9467 Manuel d'utilisateur télécharger pdf (Page 17)

Problem Possible cause Remedy

You cannot select the

maximum heat setting for

one of the cooking zones.

The other zones consume

the maximum available

power.

Your hob works properly.

Reduce the heat setting of

the other cooking zones

connected to the same

phase.

Refer to "Power manage‐

ment".

An acoustic signal sounds

and the hob deactivates.

An acoustic signal sounds

when the hob is deactiva‐

ted.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The hob deactivates. You put something on the

sensor field .

Remove the object from

the sensor field.

Residual heat indicator

does not come on.

The zone is not hot be‐

cause it operated only for a

short time or the sensor is

damaged.

If the zone operated suffi‐

ciently long to be hot,

speak to an Authorised

Service Centre.

Hob²Hood does not work. You covered the control

panel.

Remove the object from

the control panel.

The sensor fields become

hot.

The cookware is too large

or you put it too near to the

controls.

Put large cookware on the

rear zones if possible.

There is no sound when

you touch the panel sensor

fields.

The sounds are deactiva‐

ted.

Activate the sounds. Refer

to "Daily use".

comes on.

Child Safety Device or

Lock operates.

Refer to "Daily use".

and a number come on.

There is an error in the

hob.

Deactivate the hob and ac‐

tivate it again after 30 sec‐

onds. If comes on

again, disconnect the hob

from the electrical supply.

After 30 seconds, connect

the hob again. If the prob‐

lem continues, speak to an

Authorised Service Centre.

You can hear a constant

beep noise.

The electrical connection is

incorrect.

Disconnect the hob from

the electrical supply. Ask a

qualified electrician to

check the installation.

ENGLISH 17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Commentaires sur ces manuels

Pas de commentaire