Electrolux EBKGL7CN Manuel d'utilisateur télécharger pdf (Page 13)

flashes in the display.

3. Use or to set the END and

to confirm. First you set the minutes

and then the hours.

When the set time ends, an acoustic

signal sounds for two minutes. symbol

and the time setting flash in the display.

The appliance deactivates.

4. Touch a sensor field to stop the

acoustic signal.

5. Deactivate the appliance.

7.5 Setting the MINUTE MINDER

Use the MINUTE MINDER to set a

countdown (maximum 2 h 30 min). This

function has no effect on the operation of

the oven. You can set the MINUTE

MINDER at any time and also when the

appliance is off.

1. Touch .

and "00" flash in the display.

2. Use or to set the MINUTE

MINDER. First you set the seconds,

then the minutes and the hours.

3. Touch and at the same time

to reset the set time.

4. Touch or the MINUTE MINDER

starts automatically after five seconds.

When the set time ends, an acoustic

signal sounds for two minutes and 00:00

and flash in the display.

5. Touch a sensor field to stop the

acoustic signal.

7.6 Setting the Time delay

function

The DURATION and END can be

used at the same time, if the appliance is

to be switched on and off automatically

later. In this case, first set the DURATION

and then the END function (refer to

"Setting the DURATION" and "Setting the

END" ).

8. AUTOMATIC PROGRAMMES

WARNING!

Refer to Safety chapters.

There are 9 automatic programmes. The

display shows the shelf position and the

default cooking times for all automatic

programmes. You can find the recipes for

the automatic programmes in the "Recipe

book".

8.1 Automatic programmes

1. Activate the appliance.

2. Touch .

The display shows the number of the

automatic programme (P1 – P9).

3. Touch or to choose the

automatic programme.

4. Touch or wait five seconds until

the appliance automatically starts to

work.

5. When the set time ends, an acoustic

signal sounds for two minutes. The

symbol flashes.

The appliance deactivates.

6. Touch a sensor field to stop the

acoustic signal.

8.2 Automatic programmes with

weight input

If you set the weight of the meat, the

appliance calculates the roasting time.

1. Activate the appliance.

2. Touch .

3. Touch or to set the weight

programme. Refer to the "Recipe

book".

The display shows: the cooking time, the

duration symbol , a default weight, a

unit of measurement (g).

4. Touch or the settings save

automatically after five seconds.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Commentaires sur ces manuels

Pas de commentaire