Electrolux EGC3322NOK Manuel d'utilisateur Page 12
- Page / 20
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
8.1 Before the installation
Before you install the hob, write down the
information bellow from the rating plate.
The rating plate is on the bottom of the
hob.
Model .......................................
PNC .........................................
Serial number ...........................
8.2 Gas Connection
WARNING!
The following instructions
about installation,
maintenance and ventilation
must be carried out by
qualified personnel in
compliance with the
regulation in force (UNI-CIG
7129 - 7131). Make sure that
the kitchen is well ventilated:
keep natural ventilation
holes open (at least 100
cm²) or install a mechanical
extractor hood.
Choose fixed connections or use a
flexible pipe in stainless steel in
compliance with the regulation in force. If
you use flexible metallic pipes, be careful
they do not come in touch with mobile
parts or they are not squeezed. Also be
careful when the hob is put together with
an oven.
Make sure that the gas
supply pressure of the
appliance obeys the
recommended values.
If the supplied pressure has not the
specified value, it is necessary to
assemble a proper pressure regulator in
compliance with the standard UNI EN 88.
For Liquid Gas (LPG) the use of pressure
regulator is allowed only if they are in
compliance with UNI EN 12864. The
adjustable connection is fixed to the
comprehensive ramp by means of a
threaded nut G 1/2". Screw the parts
without force, adjust the connection in
the necessary direction and tighten
everything.
A
B
C
A) End of shaft with nut
B) Washer
C) Elbow (if needed)
Rigid connection:
Carry out connection by using metal rigid
pipes (copper with mechanical end)
(UNI-CIG 7129).
Flexible connection:
Use a flexible pipe in stainless steel
(UNI-CIG 9891) with a maximum length 2
m.
WARNING!
When installation is
complete, make sure that
the seal of each pipe fitting
is correct. Use a soapy
solution, not a flame!
8.3 Injectors replacement
1. Remove the pan supports.
2. Remove the caps and crowns of the
burner.
3. With a socket spanner 7 remove the
injectors and replace them with the
ones which are necessary for the
type of gas you use (see table in
"Technical Information" chapter).
4. Assemble the parts, follow the same
procedure backwards.
5. Replace the rating plate (it is near the
gas supply pipe) with the one for the
new type of gas supply. You can find
this plate in the package supplied
with the appliance.
If the supply gas pressure is changeable
or different from the necessary pressure,
you must fit an applicable pressure
adjuster on the gas supply pipe.
www.electrolux.com12
- EN Hob User Manual 1
- CONTENTS 2
- WE’RE THINKING OF YOU 2
- CUSTOMER CARE AND SERVICE 2
- SAFETY INFORMATION 2
- 1.2 General Safety 3
- 2. SAFETY INSTRUCTIONS 4
- 2.2 Electrical Connection 5
- 2.3 Gas connection 5
- 2.5 Care and cleaning 6
- 2.6 Disposal 6
- 3. PRODUCT DESCRIPTION 7
- 4. DAILY USE 7
- 4.2 Ignition of the burner 8
- 4.3 Turning the burner off 8
- 5. HINTS AND TIPS 9
- 6. CARE AND CLEANING 9
- 7. TROUBLESHOOTING 10
- 8. INSTALLATION 11
- 8.1 Before the installation 12
- 8.2 Gas Connection 12
- 8.3 Injectors replacement 12
- 8.7 Building In 13
- 8.4 Adjustment of minimum 13
- 8.5 Electrical connection 13
- 8.6 Connection cable 13
- 9. TECHNICAL INFORMATION 14
- 10. ENERGY EFFICIENCY 15
- 11. ENVIRONMENT CONCERNS 16
- ENGLISH 17 17
- ENGLISH 19 19
- 867315919-A-482014 20
Produits connexes et manuels pour Plaques chauffantes Electrolux EGC3322NOK
(60 pages)
(20 pages)
(36 pages)Samsung SM-T715N0 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Nein Samsung SM-T715N0.
Wir stellen 2 PDF-Handbücher Samsung SM-T715N0 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Bedienungsanleitung
Commentaires sur ces manuels