
and dry them. If necessary, remove
stubborn stains with a paste cleaner.
3. After you clean the pan supports,
make sure that they are in correct
positions.
4. For the burner to operate correctly,
make sure that the arms of the pan
supports are aligned with the centre of
the burner.
6.3 Removing pan supports
To keep the pan supports in the correct
position, they are put on metal pins
installed in the lateral sides of the hob. For
easier cleaning, pan supports can be
removed from the hob. Lift up the pan
supports keeping them in horizontal
position as shown in the graphic.
Do not lift the pan supports at
an angle, as this will put strain
on the metal pins. This can
cause damage to the pins
and cause them to break.
The shape of pan supports and the
amount of burners can be different in
other models of the appliance.
6.4 Cleaning the hob
• Remove immediately: melted plastic,
plastic foil, and food with sugar. If not,
the dirt can cause damage to the hob.
• Remove when the hob is
sufficiently cool: limescale rings,
water rings, fat stains, shiny metallic
discoloration. Clean the hob with a
moist cloth and some detergent. After
cleaning, rub the hob dry with a soft
cloth.
• To clean the enamelled parts, cap and
crown, wash them with warm soapy
water and dry them carefully before
you put them back.
6.5 Cleaning of the Vertical
Burner
The crowns of brass burners can darken
after long use. To remove the dark marks,
do as follows:
1. Prepare a mixture of 50% water and
50% wine vinegar.
2. Soak the crowns in the mixture for no
longer than 10 minutes. Remove the
marks with a sponge. A high
concentration of moisture or
immersion of the burners in water for
too long can cause damage to their
surfaces.
3. Rinse the crowns in water to remove
the mixture and dry them carefully.
6.6 Cleaning the spark plug
This feature is obtained through a ceramic
ignition candle with a metal electrode.
Keep these components well clean to
www.electrolux.com10
Commentaires sur ces manuels