Electrolux EHD6691X45C Manuel d'utilisateur télécharger pdf (Page 13)

Safety cut-out

Cooking surface

• If after switching on the cooking surface, a heat

setting is not set for a cooking zone within approx.

10 seconds, the cooking surface automatically

switches itself off.

• If one or more sensor fields are covered for longer

than approx. 10 seconds, e.g. by a pan placed

upon it, a signal sounds and the cooking surface

switches off automatically.

• If all cooking zones are switched off, the cooking

surface automatically switches itself off after ap-

prox. 10 seconds.

Control panel

3 Moisture (e.g. a wet cloth) or liquid boiling over

onto the control panel immediately switches

all cooking zones off.

Cooking zones

• In the event of overheating (e.g. when a pan boils

dry) the cooking zone automatically switches itself

off. _ is displayed. Before being used again, the

cooking zone must be set to 0 and allowed to cool

down.

• If cookware that is not suitable is used, f flashes

in the display and after 10 minutes the display for

the cooking zone switches itself off.

• If one of the cooking zones is not switched off after

a certain time, or if the heat setting is not modified,

the relevant cooking zone switches off automati-

cally.

Heat setting Switches off after

v, 1 -2 6 hours

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 67 68

Pas de commentaire

Electrolux EHD6691X45C Manuel d'utilisateur Page 13