Electrolux EHE642X Manuel d'utilisateur télécharger pdf (Page 12)

Energy saving

2 Always place cookware on the hotplate

before it is switched on.

2 If possible, always place lids on the pans.

2 Switch hotplates off before the end of the

cooking time, to take advantage of resid-

ual heat.

2 Bottom of pans and hotplate should be

the same size.

Cleaning and Care

1 Take care! Risk of burns from residual heat.

Let the appliance cool down.

Cleaning the appliance after each use

1. Wipe the appliance with a damp cloth and a little washing up liquid.

2. Rub the appliance dry using a clean cloth.

Removing deposits

1. Remove heavy deposits from the hotplates using fine scouring powder or

a scouring pad.

2. Wipe off residues with a damp cloth.

3. Then heat the hotplate to a low temperature and leave to dry.

4. To maintain the hotplates, rub in a little sewing machine oil now and again

and then polish off with absorbent paper.

1 Important: Do not clean the stainless steel edge of the hob with scouring

powder or a scouring pad as this will leave scratches!

For stainless steel hobs only use suitable stainless steel cleaning and main-

tenance products. Please the manufacturer’s instructions.

3 The stainless steel edge of the plate can be slightly discoloured as a result

of thermal load. This process is caused by the physical properties.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Pas de commentaire

Electrolux EHE642X Manuel d'utilisateur Page 12