Electrolux EHGL30SP Manuel d'utilisateur télécharger pdf (Page 27)

WARNING!

Danger of electrocution!

Disconnect the fuse before

you replace the lamp.

The lamp and the lamp glass

cover can be hot.

1. Deactivate the appliance.

2. Remove the fuses from the fuse box

or deactivate the circuit breaker.

The top lamp

1. Turn the lamp glass cover

counterclockwise to remove it.

2. Clean the glass cover.

3. Replace the lamp with a halogen, 230

V, 40 W, 300 °C heat resistant lamp.

4. Install the glass cover.

The side lamp

1. Remove the left shelf support to get

access to the lamp.

2. Use a narrow, blunt object (e.g. a

teaspoon) to remove the glass cover.

3. Clean the glass cover.

4. Replace the lamp with a halogen, 230

V, 40 W, 300 °C heat resistant lamp.

5. Install the glass cover.

6. Install the left shelf support.

11. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

11.1 What to do if...

Problem Possible cause Remedy

The cooking zones do not

operate.

Refer to the operating instructions for the built-in cooking

surface.

The oven does not heat up. The oven is deactivated. Activate the oven.

The oven does not heat up. The clock is not set. Set the clock.

The oven does not heat up. The necessary settings are

not set.

Make sure that the settings

are correct.

ENGLISH

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Pas de commentaire

Electrolux EHGL30SP Manuel d'utilisateur Page 27