Electrolux EHT60418W Manuel d'utilisateur télécharger pdf (Page 6)

• Connect the appliance to the mains with

a device that lets to disconnect the appli-

ance from the mains at all poles with a

contact opening width of minimum 3

mm, eg. automatic line protecting cut-

out, earth leakage trips or fuse.

• None of a parts of the connection cable

can not get a temperature 90°C. The

blue neutral cable must be connected to

the terminal block label with "N". The

brown (or black) phase cable (fitted in the

terminal block contact marked with "L")

must always be connected to the live

phase.

Replacement of the connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to

the voltage and the working temperature.

The yellow/green earth wire must be ap-

proximately 2 cm longer than the brown (or

black) phase wire.

Building In

min. 600 mm

min. 55 mm

min. 650 mm

550 mm

470 mm

min. 450 mm

30 mm

A

A - supplied seal

A

B

A - supplied seal

B - supplied brackets

Possibilities for insertion

Kitchen unit with door

The panel installed below the hob must be

easy to remove and let an easy access in

case a technical assistance intervention is

necessary.

min 20 mm

(max 150 mm)

30 mm

60 mm

b

a

a) Removable panel

b) Space for connections

Kitchen unit with oven

The hob recess dimensions must obey the

indication and the kitchen unit must be

equipped with vents to let a continuous

supply of air. The electrical connection of

the hob and the oven must be installed

separately for safety reasons and to let easy

remove oven from the unit.

6 electrolux

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire