Electrolux EKC54553OS Manuel d'utilisateur télécharger pdf (Page 8)

Refer to "Care and cleaning"

chapter.

Clean the appliance before first use.

Put the accessories back to their initial

position.

4.2 Setting the time

You must set the time before you operate

the oven.

The indicator for the Time of day function

flashes when you connect the appliance

to the electrical supply, when there was a

power cut or when the timer is not set.

Press the or button to set the

correct time.

After approximately five seconds, the

flashing stops and the display shows the

time of day you set.

4.3 Changing the time

You cannot change the time

of day if the Duration or

End function operates.

Press again and again until the

indicator for the Time of Day function

flashes.

To set a new time, refer to "Setting the

time".

4.4 Preheating

Preheat the empty appliance to burn off

the remaining grease.

1. Set the function

and the maximum

temperature.

2. Let the appliance operate for 1 hour.

3. Set the function and the maximum

temperature. The maximum

temperature for this function is 210

°C.

4. Let the appliance operate for 15

minutes.

5. Set the function and the maximum

temperature.

6. Let the appliance operate for 15

minutes.

Accessories can become hotter than

usual. The appliance can emit an odour

and smoke. This is normal. Make sure that

the airflow in the room is sufficient.

5. HOB - DAILY USE

WARNING!

Refer to Safety chapters.

5.1 Heat setting

Symbols Function

Off position

Double zone

1 - 9

Heat settings

Use the residual heat to

decrease energy

consumption. Deactivate the

cooking zone approximately

5 - 10 minutes before the

cooking process is

completed.

Turn the knob to a necessary heat setting.

The hob control indicator comes on.

To complete the cooking process, turn the

knob to the off position.

If all cooking zones are deactivated, the

hob control indicator goes out.

5.2 Activating and deactivating

the outer rings

You can adjust the surface you cook to

the dimension of the cookware.

To activate the outer ring: turn the knob

clockwise through a light resistance to

. Then turn the knob counterclockwise

to the correct heat setting.

To deactivate the outer ring: turn the

knob to the off position. The indicator

goes out.

www.electrolux.com8

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Commentaires sur ces manuels

Pas de commentaire