Electrolux EKG6000A0X Manuel d'utilisateur télécharger pdf (Page 22)

BURNER Ø BYPASS 1/100 mm

Rapid 42

Oven 50

Grill 50

13.5 Gas burners for LPG G30 28-30 mbar

BURNER NORMAL

POWER kW

GAS RATE g/h REDUCED

POWER kW

INJECTOR

MARK 1/100 mm

Rapid 3.0 218.1 0.72 88

Semi-rapid 2.0 145.4 0.43 71

Auxiliary 1.0 72.7 0.35 50

Oven 2.5 181.8 1.0 75

Grill 2.4 174.5 1.5 75

13.6 Gas connection

WARNING!

Before you connect the gas,

disconnect the appliance

from the electricity supply or

switch off the fuse in the

fuse box. Close the primary

valve of the gas supply.

The gas pipe in the appliance has two

endings. You can connect the gas supply

to either one of them. The pipe that is not

used must be clogged with the pipe

closer, which added to the appliance.

Use a fixed connections or use a flexible

stainless steel pipes in compliance with

the regulation in force. If you use flexible

metallic pipes, make sure they do not

come in touch with mobile parts and they

are not squeezed.

WARNING!

When installation is

complete, make sure that

the seal of each pipe fitting

does not leak. To check the

seal use a soap solution, not

a flame.

13.7 Flexible nonmetal pipes

connection

If you have an easy access to the

connection, you can use a flexible pipe.

The flexible pipe must be tightly attached

by clamps.

In installation always use the pipe holder

and the gasket. The flexible pipe can be

applied when:

www.electrolux.com22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire