
11.1 What to do if...
Problem Possible cause Remedy
The oven does not heat
up.
The oven is off. Turn on the oven.
The oven does not heat
up.
The fuse is blown. Make sure that the fuse is
the cause of the malfunc‐
tion. If the fuse problem re‐
curs, contact a qualified
electrician.
The oven does not work. The automatic ignition
does not work.
Light the burner with a long
match. Hold the flame near
the hole in the bottom of
the oven cavity. At the
same time push the knob
for the gas control and turn
it counterclockwise to the
maximum temperature.
When the flame lights,
keep the knob for the gas
control pushed for 15 sec‐
onds or less to warm up
the thermocouple. Other‐
wise the gas flow is inter‐
rupted.
The lamp does not work. The lamp is broken. Replace the lamp.
Steam and condensation
settle on the food and in
the oven cavity.
A dish was left in the oven
for too long.
Food should not be left in
the oven for longer than
15-20 minutes after cook‐
ing.
The flame extinguishes im‐
mediately after ignition.
The thermocouple is not
heated up.
After the flame lights, keep
the knob for the gas con‐
trol pushed for 15 seconds
or less.
The turnspit does not ro‐
tate.
The turnspit is not correctly
installed into the turnspit
hole.
Refer to "Using the acces‐
sories" chapter, Using the
turnspit.
11.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
www.electrolux.com18
Commentaires sur ces manuels