Electrolux GHGL4046CN Manuel d'installation télécharger pdf (Page 6)

2. Place the oven in front of the niche

where it will be installed.

3. Secure the gas hose to the

appliance. The connection should be

gas tight and secured with a thread,

for example hemp rope.

WARNING!

The electrical installation

should be secure and it

cannot pose any risk of

electrical shock. The

screws securing the gas

installation and the

installation itself must

not be touched.

A 595 +0/-1

N 600

1

5

6

2

3

4

1. Gas pipe

2. Electrical cable

3. Gas valve

4. Gas connection

5. Electrical connection

6. Front flap

4. Slide the oven into its place until its

front is aligned with the fronts of the

surrounding furniture panels. Secure

the appliance at the two sides with

two screws.

A

Make sure that the gas hose does not

become crushed or bent in any way

during the installation.

1.11 Installing burners

1. Remove the screws (1) and (3) from

the transport safeguards on the left

and right side (2) and remove the

transport safeguards.

2. Loosen the four screws (4) next to

the four burners.

1

2

4

3

3

1

2

3

3

CAUTION!

The screws to secure

the horizontal support

are necessary when the

hob is installed with a

wooden surround frame.

3. If necessary, loosen the eight screws

(5) on the two cross bars and lift the

cross bars up. Tighten the screws

again firmly.

5

5

4. Lift the burner unit to the height of the

worktop. Burners on upper corner of

the cooking zones should achieve

the height of the worktop.

www.electrolux.com6

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire