Electrolux SM 554 Manuel de service télécharger pdf (Page 25)

Service

Manual

Edition

Type

12. Function Sequences

17 9108

Page

Detergent

The machine has three built-in detergent compartments controlled by three

water valves. A total of five valves can also be controlled in an external

supply unit via connector X19. The following conditions must be met to

control the valves:

• The door must be closed and locked, and the programmer knob must be

in position I (see ”Power supply and start” sequence).

• Row M, stop (1) must not be programmed

• The out-of-balance switch must not have tripped (breaks K53:51-52 (2)

power supply)

• Row K, drain (3) must not be programmed

Once these conditions are met, the water valves can be controlled by

programming row A (4), detergent prewash, row C (6), detergent main

wash and row I (9), softener. Row E (7) and row G (8) can be used to

control another two valves in an external supply unit.

Row P (10) controls valve Y11b (14) which is used for cool-down (see

sequence '’Cool-down’').

Water valve Y11a/Y21 (12) can also be controlled manually with switch

S37 (5) on the machine control panel.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 90 91

Pas de commentaire

Electrolux SM 554 Manuel de service Page 25