Electrolux EDC67550W Manuel d'utilisateur Page 10

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 59
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 9
10 electrolux use
At the end of the programme the
selector dial must be turned to
position O, to switch the machine off.
Attention!
If you turn the programme selector dial
to another programme when the
machine is working, the lights of the
programme progress display start to
flash. The machine will not perform the
new selected programme.
Programme Option buttons
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select “Delicaat” (delicate)
Pressing this button allows drying to be
performed at a lower temperature, for
delicate items.
The corresponding pilot light comes
on. This option can also be used for
time controlled drying.
“Delicaat” is only suitable for use with
loads of up to 3kg!
When the programme has finished the
pilot lights End is on.
Select the “Droogtegraad”
(dryness)
Press the “Droogtegraad”
button
repeatedly, to select the desired option.
The relevant light will light up. Laundry
becomes dryer from MIN to MAX.
Press the “Droogtegraad”button as
many times as necessary until the small
light at the level of residual dampness
required is illuminated.
When the programme has finished the
pilot lights End is on.
Select the “Zoemer” (buzzer)
When the drying cycle has finished, an
intermittent audible signal will sound.
By depressing button “Zoemer” the
acoustic signal is switched off in the follo-
wing cases:
when selecting the programme
when depressing the buttons
when the programme selector dial is
turned to another position during the
programme or when you depress an
option button during the cycle
at the end of the programme.
The corresponding light comes on
Select the “Start/Pauze”
Vue de la page 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 58 59

Commentaires sur ces manuels

Pas de commentaire