Electrolux EXI12HA7WE Manuel d'utilisateur télécharger pdf (Page 17)

Service manual

8.8 Evacuation

Procedure:

1. Connect the vacuum pump to the charge set’s centre hose.

2. Evacuation for approximately one hour.

 Confirm that the gauge needle has moved toward -0.1 Mpa (-76 cmHg) [vacuum of 4 mmHg or less].

3. Close the valve (Low side) on the charge set, turn off the vacuum pump, and confirm that the

gauge needle does not move (approximately 5 minutes after turning off the vacuum pump).

4. Disconnect the charge hose from the vacuum pump.

 Vacuum pump oil, if the vacuum pump oil becomes dirty or depleted, replenish as needle.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 25 26

Pas de commentaire

Electrolux EXI12HA7WE Manuel d'utilisateur Page 17