Electrolux EFME427UIW Manuel d'instructions

Naviguer en ligne ou télécharger Manuel d'instructions pour Non Electrolux EFME427UIW. Electrolux EFME427UIW Instruction Manual 2 Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 16
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
Canada 1-800-265-8352
Push Button Cycle Select Dryer User Interface
Rotary Dial Cycle Select Dryer User Interface
A11199902 (1803)
USA 1-877-435-3287
This information is intended for Qualified Technicians Only.
TABLE OF CONTENTS
Entering Diagnostic Mode:
1. Press power and look for console light up.
2. Rotate cycle selector ring (on some models) or repeatedly press
cycle button (on other models) to set cycle to normal.
3. Press the start button.
4. Power off machine by pressing the power button.
5. Power on machine by pressing the power button again.
6. Within 10 seconds, simultaneously hold temp + select (set) but-
tons together for 3 seconds.
7. Diagnostic Mode is active when LED’s start blinking in sequence.
This is the pre-test position “ , which tests the lights and buttons.
Safety items throughout this manual are labeled with a WARNING or
CAUTION based on the risk type as described below:
This symbol alerts you to situations that may
cause bodily injury or property damage.
This symbol alerts you to situations that may
cause serious body harm, death or property
damage.
Dryer Tech Data Sheet
Scrolling through Diagnostic Mode tests:
Tests are selected by using the same method to select cycles.
See
Diagnostic Mode Tests Table.
To begin, press and hold the cycles button for 2 seconds. The unit
will advance to the first test; and flash “ “ on the display.
Press the cycles button to advance to the following test. Press the
temp button to go back to the previous test. Test sequence numbers
are briefly displayed when each test is selected. The displayed test
numbers also correspond to the selector LEDs to the right of the
numeric display; beginning with the top LED, following downward.
Exiting Diagnostic Mode:
Hold the power key for 3 sec, when not in “ test step
Lights/Buttons, or unplug the unit.
www.electroluxappliances.com
CAUTION
WARNING
CAUTION
Unless otherwise directed, disconnect electrical current before
servicing.
Dryer Tech Data Sheet ........................................................................... 1
Diagnostic Mode Tests/Demo Mode ...................................................... 2
Dryer Error Codes .................................................................................. 3
Wiring Diagrams .................................................................................. 10
1
power
2
cycle status display
3
cycle selector
4
temperature
5
dryness (dry level)
6
time dry (dry time)
7
options
8
select (set)
9
cancel
10
start / pause
2 71 63 854 9
10
2 71 63 9854 10
Vue de la page 0
1 2 3 4 5 6 ... 15 16

Résumé du contenu

Page 1 - Dryer Tech Data Sheet

1Canada 1-800-265-8352Push Button Cycle Select Dryer User InterfaceRotary Dial Cycle Select Dryer User InterfaceA11199902 (1803)USA 1-877-435-3287Thi

Page 2

10Wiring Diagram - 427 Gas Dryer; Schéma de câblage–sécheuse à gaz 427; Esquema de cableado eléctrico - 427 Secadora de Gas (A11100201)Wiring Diagr

Page 3 - Dryer Error Codes

11Wiring Diagram - 527 and 627 Gas Dryer; Schéma de câblage–sécheuses à gaz 527 et 627; Esquema de cableado eléctrico - 527 y 627 Secadora a Gas (A1

Page 4 - PRUDENCE

12Wiring Diagram - 427 Electric Dryer; Schéma de câblage–sécheuse électrique 427 Esquema de cableado eléctrico - 427 Secadora eléctrica (A11100701)

Page 5 - REMARQUE

13Wiring DiagramsWiring Diagram - 527 and 627 Electric Dryer; Schéma de câblage–sécheuses électriques 527 et 627 Esquema de cableado eléctrico - 527

Page 7 - PRECAUCIÓN

15Notes | Remarques | Notas

Page 8

16Notes | Remarques | Notas

Page 9

2Diagnostic Mode Tests/Demo ModeMODENUMBERTEST NAME COMPONENTS UNDER TEST TEST CONDITIONS DISPLAYED FEEDBACKpre-testLights, Buttons LED indicatorsLCD

Page 10 - Schéma de câblage

3Dryer Error CodesErrorCodeError Description Possible Causes DisplayNotification34 Capacitive sensor values read by main control board is not within th

Page 11

4Au Canada: 1-800-265-8352Cycle avec bouton-poussoir, sélectionnez l'interface utilisateur < dryer > (séchage)Cycle avec cadran rotatif,

Page 12

5Essais en mode diagnostic et mode démoMODE NUMÉRO LIBELLÉ DE L'ESSAI COMPOSANTS SOUS ESSAI CONDITIONS D’ESSAI RÉTROACTION AFFICHÉEessai prélimin

Page 13

6Codes d’erreur de la sécheuseErreurCodeDescription des erreurs Raisons possibles AffichageSignalement34 Les valeurs de capteur capacitives lues par l

Page 14 - Notes

7Canadá 1-800-265-8352Pulse el botón interfac de usuario selección de cicloInterfaz de usuario seleccionar ciclo dial rotativoA11199902 (1803)EE.UU.

Page 15

8Pruebas del modo de diagnósticoMODONÚMERO 1NOMBRE DE LA PRUEBACOMPONENTES SUJETOS A PRUEBACONDICIONES DE LA PRUEBA RESPUESTA MOSTRADApre-pruebaLuce

Page 16

9Códigos de error de la secadoraCódigo de errorDescripción del error Posible causa PantallaNotificación34 Los valores del sensor capacitivo leídos por

Commentaires sur ces manuels

Pas de commentaire