Electrolux IH24E Manuel d'utilisateur télécharger pdf (Page 12)

− Shut off cold water on shutoff unit (1)

− Loosen cap nut (2) using a spanner

− Take out and clean strainer (3)

− Re-assemble in reverse sequence

− Open cold water on shutoff unit (1); check

tightness

Cleaning the strainer insert

If the water flowrate is reduced by dirt from the cold water line, the strainer-

insert should be cleaned as follows:

Flow rate limiter

The flow rate limiter (2) is installed in the cold

water connector (1) to allow a constant outlet

temperature at high flow pressures of approx. 40° C,

suitable for showering.

(See table page 4 and 6)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Pas de commentaire

Electrolux IH24E Manuel d'utilisateur Page 12