Electrolux EWF14780W Manuel d'utilisateur

user manualWashing MachineEWF 12780 WEWF 14780 W

Cancelling the delayed start after havingpressed button 8 :1. Set the washing machine to PAUSE bypressing button 8 .2.Press button 6 once until the sy

Press the button again to restart the pro-gramme.Cancelling a programmeTurn the selector dial to to cancel a pro-gramme which is running.You can sele

Before loading the laundryNever wash whites and coloureds together.Whites may lose their «whiteness» in thewash.New coloured items may run in the firs

• powder detergents for delicate fabrics(60°C max) and woollens• liquid detergents, preferably for low tem-perature wash programmes (60°C max)for all

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentCOTTON WITH P

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentSYNTHETIC ECO

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentSILK 30°Main

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartmentDRAIN Drainin

External cleaningClean the exterior cabinet of the appliancewith soap and water only, and then dry thor-oughly.Important! Do not use methylated spirit

Door sealCheck from time to time the door seal andeliminate eventual possible objects thatcould be trapped in the fold.Drain pumpThe pump should be in

Electrolux. Thinking of you.Share more of our thinking at www.electrolux.comContentsSafety information 2Product description 4Control panel 5F

Warning!When the appliance is in use and dependingon the programme selected there can be hotwater in the pump. Never remove the pumpcover during a was

placed on the floor and let water drainout.4. Screw the water inlet hose back on andreposition the emergency emptying hoseafter having put the cap on

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent (creates too muchfoam) has been used.• Reduce th

Mod. ... ... ...Prod. No. ... ... ... Ser. No. ... ... ...Mod. ... ... ...Prod. No. ... ... .. Ser. No. ... ... ...Te

InstallationUnpackingAll transit bolts and packing must be re-moved before using the appliance.You are advised to keep all transit devices sothat they

6. Fill the smaller upper hole and the twolarge ones with the corresponding plasticplug caps supplied in the bag containingthe instruction booklet.Pos

Do not place the inlet hose downwards.Angle the hose to the left or right depend-ing on the position of your water tap.3. Set the hose correctly by lo

Electrical connectionInformation on the electrical connection isgiven on the rating plate on the inner edge ofthe appliance door.Check that your domes

192994441-00-382009www.electrolux.com

Installation• This appliance is heavy. Care should betaken when moving it.• When unpacking the appliance, check thatit is not damaged. If in doubt, do

Product descriptionYour new appliance meets all modern requirements for effective treatment of laundrywith low water, energy and detergent consumption

Programme ChartVarious programme charts in different lan-guages are supplied with the appliance. Oneis on the front side of the detergent dispenserdra

Time ManagerThese buttons allows you to modify the pro-gramme duration automatically proposed bythe appliance.Display7.1 7.3 7.5 7.6 7.7 7.87.97.107.1

•End of programmeWhen the programme has finished threeblinking zeros ( ) are displayed, theicon 7.10 disappears and the door can beopened.•Incorrect

• Before the first wash, run a cotton cy-cle at the highest temperature withoutany laundry in the machine, to removeany manufacturing residue from the

Select the required programme byturning the programme selector dial (1)Turn the programme selector dial to the re-quired programme. The washing machin