Electrolux EWW1486HDW Manuel d'utilisateur télécharger pdf (Page 23)

13.7 Cleaning the inlet hose and the valve filter

1.

1

2

3

2.

3. 4.

45°

20°

13.8 Emergency drain

Because of a malfunction, the appliance

cannot drain the water.

If this occurs, do steps (1) through (9) of

'Cleaning the drain filter'.

If necessary, clean the pump.

When you drain the water with the emer-

gency drain procedure, you must activate

again the drain system:

1.

Put 2 litres of water in the main wash

compartment of the detergent dis-

penser.

2.

Start the programme to drain the wa-

ter.

13.9 Frost precautions

If the appliance is installed in an area

where the temperature can be less than

0° C, remove the remaining water from

the inlet hose and the drain pump.

1.

Disconnect the mains plug from the

mains socket.

2.

Close the water tap.

3.

Remove the water inlet hose.

4.

Put the two ends of the inlet hose in a

container and let the water flow out of

the hose.

5.

Empty the drain pump. Refer to the

emergency drain procedure.

6.

When the drain pump is empty, install

the inlet hose again.

WARNING!

Make sure that the temperature is

more than 0 °C before you use

the appliance again.

The manufacturer is not responsi-

ble for damages caused by low

temperatures.

ENGLISH 23

1 2 ... 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire