Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 21)

What to do if ...

Troubleshooting by yourself

If during operation, the error code E plus

number or letter) appears on the multi-dis-

play: Switch the appliance off and on again.

Reset programme. Press the START/PAUSE

button. If the error appears again, please

contact the Customer Care Department,

stating the error code

Problem Possible cause Remedy

Dryer does not work.

Mains plug is not plugged in or fuse

is not working correctly.

Plug in at mains socket. Check fuse

in fuse box (domestic installation).

Loading door is open. Close loading door.

Have you pressed the START/

PAUSE button?

Press the START/PAUSE button

again.

IronAid programme does

not start. the

water

tank indicator lights up.

Water tank is empty. Fill water tank.

Recirculation valve is closed (OFF

position)

Turn the recirculation valve to ON

position.

After a IronAid pro-

gramme, garments are

not sufficiently smooth.

Wrong programme selected (e.g.

SYNTHETICS instead of

COTTON).

Note the composition of the fabric.

Too low a LOAD level set. Set a higher LOAD level.

Too many garments in machine, or

garments that are too different.

Load the machine with fewer gar-

ments, or only similar ones.

Clothes are not removed until the

anti-crease phase is finished.

Remove clothes quickly one at a

time from the machine as soon as

possible after the start of the anti-

crease phase.

Garments not hung on clothes

hangers and/or not tugged into

shape.

Hang garments on clothes hang-

ers, do up buttons and tug gar-

ments into shape.

Multi-layered garments tend to lose

their shape.

Reshape multi-layered garments by

ironing after they come out of the

machine.

After a IronAid pro-

gramme, there are no

creases left in the gar-

ments.

The IronAid programme has the ef-

fect of smoothing garments.

Iron creases in again after the Iron-

Aid programme.

Drying results unsatisfac-

tory.

Wrong programme selected.

Select a different programme the

next time you dry (see “Programme

overview” chapter).

Lint filters clogged. Clean lint filters.

Fluff filter clogged. Clean fluff filter.

Heat exchanger clogged with lint. Clean heat exchanger.

Overloading of laundry.

Observe recommended loading

volumes.

Ventilation slots in base area cov-

ered up.

Uncover ventilation slots in base

area.

Residue on inside surface of drum

or drum ribs.

Clean inside surface of drum and

drum ribs.

electrolux 21

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Electrolux EDI97170W Manuel d'utilisateur Page 21

Commentaires sur ces manuels

Produits connexes et manuels pour Séchoirs à tambour Electrolux EDI97170W