Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 26)

3. Remove right polystyrene part by pulling

it. Inside this part there is a bottle of dis-

tilled water for steam programme purpo-

ses.

4. Remove left polystyrene part by pulling it.

Inside this part there is a canister for filling

distilled water tank for steam programme

purposes.

Electrical connection

Details on mains voltage, type of current and

the fuses required should be taken from the

rating plate. The rating plate is fitted near the

loading aperture (see “Product description”

chapter).

Connect the machine to an earthed socket,

in accordance with current wiring regula-

tions.

Warning! The manufacturer declines

any responsibility for damage or

injury through failure to comply with

the above safety precautions.

Should the appliance power supply

cable need to be replaced, this must

be carried out by an authorised serv-

ice engineer or a qualified electri-

cian. .

The appliance is supplied with a 13 amp plug

fitted. In the event of having to change the

fuse in the plug supplied, a 13 amp ASTA

approved BS 1363/A fuse must be used.

1

2

3

4

The wires in the mains lead are coloured in

accordance with the following code:

1 Blue - Neutral

2 cord clamp

3 Brown - Live

4 Green and Yellow - Earth

The wire coloured green and yellow must be

connected to the terminal marked with the

letter «E» or by the earth symbol

or col-

oured green and yellow.

The wire coloured blue must be connected

to the terminal «N» or coloured black.

The wire coloured brown must be connected

to the terminal marked «L» or coloured red.

Upon completion there must be no cut, or

stray strands of wire present and the cord

clamp must be secure over the outer sheath.

26 electrolux

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 55 56

Commentaires sur ces manuels

Pas de commentaire