Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 31)

max

4. Push filler neck and drawer with con-

densed water container back in.

When dry, all textiles not specifically prohibi-

ted in the chapter ‘Sorting and preparing

laundry’ may be treated with the Iron Aid

Steam System. Wet textiles may only be trea-

ted if they are labelled as suitable for dry pro-

grammes.

Water recirculation system

This system allows you to automatically use

for an Iron Aid Steam cycle the condensed

water collected in the condense water tank

during a drying cycle.

Caution! The water in the condense

water tank will never automatically fill the

steam water tank. The water

recirculation system works only if it is

supplied by water arising during

standard drying cycles.

To activate this system turn the valve to the

ON position. When the valve is ON the steam

water tank will be filled during the next drying

cycle. Water will be supplied by the water

circuit directly to the steam water tank filling

it automatically.

To activate recirculation set valve to the ON

position. To do that:

1. Pull drawer containing condensed water

container out a little (1). Behind the draw-

er there is water tank’s filler neck (2).

1

2

2. Turn the valve to the ON position. Water

will be supplied by the water circuit di-

rectly to the steam water tank filling it au-

tomatically during the next drying cycle.

The steam water tank is empty. Please fill it

and then press START/PAUSE

If valve is closed (OFF position) recircu-

lation system does not work.

Overview of Iron Aid programmes

Programmes

max. load

(weight when dry)

Additional

functions / op-

tions

Application/properties

LOAD LOAD

BUZZER )

COTTON

1.0 kg • •

For 1- 6 cotton shirts. Min. 80% natural

fibres (cotton, linen etc).

wet,

dry

electrolux 31

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 51 52

Commentaires sur ces manuels

Pas de commentaire