Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 37)

Selecting additional functions

You can choose from the additional func-

tions DRYNESS , DELICATE , BUZZER and

TIME , (if a TIME programme has been se-

lected). The symbols of the functions availa-

ble for the selected programme are shown

in the display.

DRYNESS

If laundry comes out of the machine too

damp after a standard drying programme,

you can increase the drying result by using

the DRYNESS function. Laundry becomes

drier as you move from MIN to MAX.

1. Press the DRYNESS button repeatedly

until the desired dryness level ( MIN ,

MED or MAX ) is shown in the display. If

another programme has been selected,

AUTO flashes in the display.

If wool or silk comes out of the machine too

damp at the end of a

WOOL or

SILK programme, you can dry it again by re-

starting the appropriate programme, this

time with the DRYNESS function selected

and dryness level MIN , MED or MAX . In

the case of a drying cycle with relatively dry

laundry, the length of the programme cycle

displayed at the beginning is corrected after

a while.

Caution! Caution: Make sure that by

selecting the DRYNESS function, you

do not over-dry your wool or silk.

DELICATE

For especially gentle drying of sensitive fab-

rics with the care label and for temperature-

sensitive textiles (e.g. acrylic, viscose). Pro-

gramme is executed with reduced heat.

DELICATE is only suitable for use with

loads of up to 3kg.

1.

Press the DELICATE button. The

DEL-

ICATE symbol appears in the display.

TIME

To select the programme duration after set-

ting the

TIME programme. You can se-

lect a programme duration from 10 minutes

to 3 hours in 10-minute steps. (correspond-

ing to the

COOLING programme.

1.

Turn the programme knob to the

TIMED PROGRAMME. The

minutes is in the display

2. Press the TIME button repeatedly until

the desired programme duration is

shown in the display, e.g.

for a programme of 20 minutes.

If the programme duration is not selected,

the duration is automatically set to 10 mins.

BUZZER

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions -

BUZZER "

DELAY

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions - DE-

LAY "

CHILD LOCK

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions -

CHILD LOCK"

STARTING A DRYING PROGRAMME

Press the START/PAUSE button. The pro-

gramme is started. The programme pro-

gress display shows drying progress. The

symbols for

DRYING and COOLING

appear in the display one after the other.

The number of droplets in the dryness indi-

electrolux 37

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 51 52

Commentaires sur ces manuels

Pas de commentaire