Electrolux EDI97170W Manuel d'utilisateur télécharger pdf (Page 16)

Caution! Caution: Make sure that by

selecting the DRYNESS function, you

do not over-dry your wool or silk.

DELICATE (DELICATE)

For especially gentle drying of sensitive fab-

rics with the care label and for temperature-

sensitive textiles (e.g. acrylic, viscose). Pro-

gramme is executed with reduced heat.

DELICATE is only suitable for use with

loads of up to 3kg.

1.

Press the DELICATE button. The

DEL-

ICATE symbol appears in the display.

TIME (TIME)

To select the programme duration after set-

ting the

TIME programme. You can se-

lect a programme duration from 10 minutes

to 3 hours in 10-minute steps. (correspond-

ing to the

COOLING (COOLING) pro-

gramme).

1.

Turn the programme knob to the

TIMED PROGRAMME. The

minutes is in the display

2. Press the TIME button repeatedly until

the desired programme duration is

shown in the display, e.g.

for a programme of 20 minutes.

If the programme duration is not selected,

the duration is automatically set to 10 mins.

BUZZER (BUZZER)

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions -

BUZZER "

DELAY (DELAY)

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions - DE-

LAY "

CHILD LOCK

See chapter "Iron AidTM Steam System" ,

section "Selecting additional functions -

CHILD LOCK"

STARTING A DRYING PROGRAMME

Press the START/PAUSE button. The pro-

gramme is started. The programme pro-

gress display shows drying progress. The

symbols for

DRYING and COOLING

appear in the display one after the other.

The number of droplets in the dryness indi-

cator gradually goes down as the drying

process progresses.

Changing a programme

To change a programme which has been se-

lected by mistake once the programme has

started, first turn the programme selector to

O off and then reset the programme.

The programme can no longer be

changed directly once the programme

has started. If you nevertheless attempt

to change the programme with the pro-

gramme knob or an additional function

button (except the BUZZER button),

the START/PAUSE button and

will flash in the multi-display. The drying

programme is not however affected by

this.

Removing laundry or loading laundry

when necessary

Warning! Laundry and drumcan be-

come hot. Risk of burns!

1. Open loading door

2. Load or remove laundry items.

3. Close the door securely. Lock must au-

dibly lock.

4. Press the START/PAUSE button to con-

tinue the drying cycle.

Drying cycle complete / removing

laundry

Once the drying programme has finished,

CREASE GUARD lights up in the dis-

play. If the

BUZZER is activated, an audi-

ble signal sounds at regular intervals.

The drying cycle is automatically fol-

lowed by a anti-crease phase which

lasts around 30 minutes.

The drum rotates at intervals during this

phase. This keeps the laundry loose and

free of creases. It can be removed at any

time during the anti-crease phase. (The laun-

dry should be taken out towards the end of

16 electrolux

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 59 60

Commentaires sur ces manuels

Pas de commentaire