Electrolux Z8220 Manuel d'utilisateur télécharger pdf (Page 7)

Cleaning the exhaust lter

There are two types of Electrolux Twinclean exhaust lters:

• Standardlter.Mustbecleanedevery5–7years.

• HEPAlter(thickerwithcreasedbrematerial).Mustbe

cleaned every 2–3 years.

There is no dierence in how the lters are cleaned or

tted.

30 Removethedustcontainerbypressingtherelease

button at the back of the vacuum cleaner and lifting

the container.

31 Lift the two snap catches at the back edge of the

vacuum cleaner and open the lter cover.

32 Lift out the lter.

33 Rinsetheinside(dirtyside)inlukewarmtapwater.

Tapthelterframetoremovethewater.Repeatthe

process four times. Note: Do not use cleaning agents

and avoid touching the lter surface.

Let the lter dry.

Put the lter back into place, close the lter cover and

ret the dust container.

Clearing the hose and nozzle

The vacuum cleaner automatically stops if there is a

blockage in the nozzle, tubes or hose or if the lter or lter

holder becomes blocked. Pull out the power plug and

allow the vacuum cleaner to cool down for 20–30 minutes.

Removetheblockagethatiscausingtheproblem,and/or

replacethedirtylter.Restartthevacuumcleaner.

34 Use a suitable implement to clear the tubes and hose

of blockages.

35 It is sometimes possible to clear the hose by

“massaging”it.However,becarefulincasethe

obstruction has been caused by glass or needles

caught inside the hose. Note: The warranty does not

cover any damage to hoses caused by cleaning them.

34 35

English

1 2 3 4 5 6 7 8 9 10 11 12 ... 16 17

Pas de commentaire

Electrolux Z8220 Manuel d'utilisateur Page 7