
11
CHEC control
Autostop
If you forget to turn a cooking zone off
after use, it will be disconnected
automatically after a specific period of
time. The higher the setting, the shorter
the time before the zone is
disconnected.
Setting AUTOSTOP
1 6 hours
2 6 hours
3 5 hours
4 5 hours
5 4 hours
6 1½ hours
7 1½ hours
8 1½ hours
9 1½ hours
When the autostop function is activated
the display will show:
The zones cannot be used. Turn all the
control buttons to 0.
The zones can now be used.
Automax
AUTOMAX supplies the zone with full
heat for a specific period, and then
adjusts down to the setting you have
chosen. When you turn on a zone
AUTOMAX starts automatically. The
display alternates between A and the
setting chosen. The period for which
AUTOMAX is connected depends on
the setting chosen. Please see the table
of settings.
18
Tips on the use of the
ceramic hob unit
Do not slide saucepans across the
surface of the hob - always lift the pan
when placing it on, or removing it
from the ceramic surface.
Wipe the bottom surface of the pots
and pans with a clean dry cloth before
placing them on the ceramic surface.
This helps to reduce cleaning and
prevents scratching the hob glass.
Wipe off spills whilst the hob is warm.
Select the highest setting for the
cooking zones until the food is brought
to the boil, then reduce the setting.
Use saucepans with an even base. An
uneven based saucepan may increase
the electricity consumption by up to
50%.
The saucepan should match the
cooking zone or be slightly larger.
Use a tightly fitting lid on the saucepan
to reduce electricity consumption.
Commentaires sur ces manuels