Electrolux EHSL6-4WE Manuel d'utilisateur télécharger pdf (Page 22)

A = appliance

N = recess

2. Install the glass ceramic cooking surface

and hobs according to the separate in-

stallation instructions.

3. Pull the appliance drawer out as far as it

goes, take hold of it and remove it.

4. Use the side handles to hold the oven

and slide it flush into the recess.

5. Use at least 2 screws to fix the oven on

both sides (Detail A).

Warning! When you install oven next

to a heatproof and heat-insulating plate

mount heatproof and heat-insulating

plate at appliance's height and provide

a depth of at least 30 cm depth.

To secure the oven you can drill 2 x

2.8mm holes at the top where you can

find the indentations (detail C).

Electrical connection

Important! Let a qualified electrician

connect the appliance to the electricity

supply.

Use a power cable of the type H05VV-F or

higher.

Install the appliance with a socket supply

line. If there is no socket supply line, the

fixed home electrical system must include

an isolating device with at least a 3 mm-

contact separation to enable a simultane-

ous and all-pole cut off from the mains (ac-

cording to NIN 2000). The customer must

have a socket for the electrical connection

that is accessible and outside the coordina-

tion room. The length of the connection ca-

ble must be approximately 120 cm with

lines connected directly to the mains.

1. Open the terminal box (detail D).

2. Open the catch on the cord grip (detail

E).

3. Connect the terminal as in the connec-

tion diagram.

4. Press the catch (detail F). The cord grip

is safely attached.

5. Close the terminal box.

22 electrolux

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Commentaires sur ces manuels

Pas de commentaire