
electrolux 9
To light a burner:
1. push the relevant control knob
in completely and turn it
anticlockwise to the maximum
position ( ).
2. then, check the flame is regular
and adjust it as required.
If the burner does not ignite, turn the
control knob to zero, and try again.
If after a few attempts the burner
does not ignite, check that the burner
cap and crown are correctly positioned
(see figure 2 - letter A and B).
To interrupt the supply of gas, turn
the knob in a clockwise direction to the
position " ".
Do not keep the control knob
pressed for more than 15
seconds.
If the burner does not light
even after 15 seconds, re-
lease the control knob, turn it
the "off" position and wait for
at least one minute before try-
ing to light the burner again.
The Gas Burner Controls
)
Control knobs on the front
panel
The knobs for using the gas hob of
the cooker are found on the control
panel. The regulation knobs could be
turned in anti-clockwise direction until
the small flame symbol, and vice-versa
for the larger symbol.
No gas supply
Maximum gas supply
Minimum gas supply
AA
AA
A - Burner cap
BB
BB
B - Burner crown
C C
C C
C - Ignition candle
Fig. 2
Fig. 1
Commentaires sur ces manuels