
5.2 FlexiBridge Standard mode
This mode is active when you activate the
hob. It connects the sections into two
separate cooking zones. The sides of the
zones which operate together in this mode
light up, and they are linked with shorter
illuminated lines. You can set the heat
setting for each zone separately. Use two
left side control bars.
Correct cookware position:
Incorrect cookware position:
5.3 FlexiBridge Big Bridge mode
To activate the mode press until you
see the correct mode indicator . This
mode connects three rear sections into
one cooking zone. The one front section is
not connected and operates as a separate
cooking zone. You can set the heat
setting for each zone separately. To set
the heat setting use the two control bars
on the left side. Use the right control bar
for the bigger zone and the left control bar
for the smaller zone.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected
sections. If you use cookware smaller than
two sections the display shows and
after 2 minutes the zone switches off.
ENGLISH
13
Commentaires sur ces manuels