Electrolux CIV63443 Manuel d'utilisateur télécharger pdf (Page 19)

Serial number ...........................

8.2 Built-in hobs

Only use the built-in hobs after you

assemble the hob into correct built-in

units and work surfaces that align to the

standards.

8.3 Connection cable

• The hob is supplied with the

connection cable.

• Replace the damaged mains cable

only with the spare parts cable. Speak

to your local Authorised Service

Center.

WARNING!

All electrical connections

must be made by a qualified

electrician.

CAUTION!

Do not drill or solder the wire

ends. This is strictly

forbidden!

CAUTION!

Do not connect the cable

without cable end sleeve.

Two-phase connection

1. Remove the cable end sleeve from

black and brown wires.

2. Remove an insulation of the brown

and black cable ends.

3. Apply a new wire end sleeve of 1.5

mm² on each cable end. (special tool

required).

Cable cross section

230V~ 400V 2~N

One-phase connection - 230 V~ Two-phase connection - 400 V 2 ~ N

Green - yellow Green - yellow

N Blue and blue Blue and blue N

L Black and brown Black L1

Brown L2

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Electrolux CIV63443 Manuel d'utilisateur Page 19