Electrolux EBKSL7CN Manuel d'utilisateur télécharger pdf (Page 19)

• If you have nonstick accessories, do

not clean them using aggressive

agents, sharp-edged objects or a dish-

washer. It can cause a damage to the

nonstick coating.

11.1 Steam Cleaning

1.

Remove the worst of the dirt manual-

ly.

2.

Put 250 ml of water with 3 table-

spoons of vinegar directly into the

steam generator.

3.

Activate the Steam Cleaning function

in the main menu. The display shows

the duration of the function.

4.

An acoustic signal sounds when the

programme is completed. Press a

button to deactivate the signal.

5.

Wipe out the appliance with a soft

cloth. Remove the remaining water

from the steam generator.

6.

Keep the appliance door open for ap-

proximately 1 hour. Wait until the ap-

pliance is dry.

11.2 Shelf supports

You can remove the shelf supports to

clean the side walls.

Removing the shelf supports

2

3

1

1.

Carefully pull the supports up and out

of the front catch.

2.

Lightly move the supports on the front

catch inwards.

3.

Pull the supports out of the rear

catch.

Installing the shelf supports

Install the shelf supports in the opposite

sequence.

11.3 Steam generation system

CAUTION!

Dry the steam generator after

each use. Soak up water with the

sponge.

Remove the limescale residue

with water and vinegar.

CAUTION!

Chemical de-scaling agents can

cause damage to the enamel. Fol-

low the instructions of the manu-

facturer.

Cleaning the water drawer and the

steam generator:

1.

Put the water and vinegar mixture

(approximately 250 ml) through the

water drawer into the steam genera-

tor.

Wait for approximately 10 minutes.

2.

Remove the water and vinegar with

the sponge.

ENGLISH 19

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Commentaires sur ces manuels

Pas de commentaire