Electrolux EBSL80CN Manuel d'utilisateur télécharger pdf (Page 14)

7. CLOCK FUNCTIONS

7.1 Clock functions table

Clock function Application

Minute Minder To set a countdown (max. 2 h 30 min). This

function has no effect on the operation of

the appliance. You can also activate it when

the appliance is deactivated.

Use to activate the function. Press

or to set the minutes and to start.

Duration To set the length of an operation (max. 23 h

59 min).

End Time To set the switch-off time for a heating

function (max. 23 h 59 min).

If you set the time for a clock function, the

time starts to count down after 5 seconds.

If you use the clock functions:

Duration, End Time, the

appliance deactivates the

heating elements after 90 % of

the set time. The appliance uses

the residual heat to continue the

cooking process until the time

ends (3 - 20 minutes).

7.2 Setting the clock functions

• Before you use the

functions: Duration, End

Time, you must set a

heating function and

temperature first. The

appliance deactivates

automatically.

• You can use the functions:

Duration and End Time at

the same time if you want to

automatically activate and

deactivate the appliance on

a given time later.

• The functions: Duration and

End Time do not work when

you use the core

temperature sensor.

1. Set a heating function.

2. Press again and again until the

display shows the necessary clock

function and the related symbol.

3. Press or to set the necessary

time.

4. Press to confirm.

When the time ends, an acoustic signal

sounds. The appliance deactivates. The

display shows a message.

5. Press a sensor field to stop the signal.

7.3 Heat + Hold

Conditions for the function:

• The set temperature is more than 80

°C.

• The function: Duration is set.

The function: Heat + Hold keeps prepared

food warm at 80 °C for 30 minutes. It

activates after the baking or roasting

procedure ends.

You can activate or deactivate the function

in the menu: Basic Settings.

1. Activate the appliance.

2. Select the heating function.

3. Set the temperature above 80 °C.

4. Press

again and again until the

display shows: Heat + Hold.

5. Press to confirm.

When the function ends, an acoustic

signal sounds.

www.electrolux.com14

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 31 32

Commentaires sur ces manuels

Pas de commentaire