Electrolux EHG30800X Manuel d'utilisateur télécharger pdf (Page 17)

electrolux 17

Possibilities for insertion

Kitchen unit with door

Proper arrangements must be taken

in designing the forniture unit, in order to

avoid any contact with the bottom of the

hob which can be heated when it is

operated. The recommended solution is

shown in Fig. 8. The panel fitted under

the hob should be easily removable to

allow an easy access if a technical assis-

tance intervention is needed.

Kitchen unit with oven

The hob recess dimensions must

comply the indication given in Fig. 6 and

must be provided with brackets to allow

a continuous supply of air.

To avoid overheating, the building in

should be carried out as shown in Figs.

9 and 10.

The hob's electric connection and

the oven's one must be carried out

separately, both for safety reasons and

to allow the oven to be easily taken off

the unit.

a) Removable panel

b) Space for connections

Fig. 8

Fig. 9

Fig. 10

Fig.7

a) seal

the cut out, taking care that the sealings

meet without overlapping;

2. place the hob in the cut out,

taking care of its centring;

3. fix the hob with the relevant

screws (Fig. 7). The traction of the

screws is able to trace the sealing, any

excess of which can then be easily

removed.

If several 30 cm hob are to be

installed side by side into the same

cut out, an assembly kit including a

support side bracket and

supplementary sealings is available

at our authorized Service Centres.

The relevant installation instructions

are supplied within the kit package.

a

1 2 ... 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire