Electrolux EHH8945FOG Manuel d'utilisateur télécharger pdf (Page 12)

Scratches or dark stains on the

glass-ceramic cause no effect on

how the appliance operates.

To remove the dirt:

•–Remove immediately: mel-

ted plastic, plastic foil, and

food with sugar. If not, the dirt

can cause damage to the ap-

pliance.

–

Remove after the appliance

is sufficiently cool: limescale

rings , water rings, fat stains,

shiny metallic discolorations.

Use a special cleaning agent

for glass ceramic.

• The surface of the hob has hori-

zontal grooves. Clean the appli-

ance with a moist cloth and

some detergent with a smooth

movement from left to right.

• At the end rub the appliance

dry with a clean cloth.

6. TROUBLESHOOTING

Problem Possible Remedy

You cannot activate the

appliance or operate it.

Activate the appliance

again and set the heat set-

ting in less than 10 sec-

onds.

You touched 2 or more

sensor fields at the same

time.

Touch only one sensor

field.

The Stop+Go function op-

erates.

Refer to the chapter “Op-

erating instructions”.

There is water or fat stains

on the control panel.

Clean the control panel.

An acoustic signal sounds

and the appliance deacti-

vates.

An acoustic signal sounds

when the appliance is de-

activated.

You put something on one

or more sensor fields.

Remove the object from

the sensor fields.

The appliance deactivates. You put something on the

sensor field

.

Remove the object from

the sensor field.

12

www.electrolux.com

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Commentaires sur ces manuels

Pas de commentaire