
Problem Possible cause Remedy
The lamp does not operate. The lamp is defective. Replace the lamp.
Steam and condensation
settle on the food and in the
cavity of the oven.
You left the dish in the oven
for too long.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
Do not remove the rating plate from the
appliance cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
INSTALLATION
WARNING! Refer to Safety
chapters.
Installing the oven under a work
surface
Installation into flammable
material must agree with NIN
SEV 1000 (Swiss Association
of the Cantonal Fire Insurance
Companies) fire protection
guidelines and regulations.
A = appliance, N = recess
1. Install the hob according to the
installation instruction number
374307900 / 374307901.
Before insert the oven into cabinet's
recess make sure to carry out the
hotplate socket and use the correct
socket connections. There is no need
to use a separate earthing.
2. Pull the appliance drawer out as far as
it goes and remove it.
3. Use the side handles to hold the oven
and slide it flush into the recess.
Make sure the cable is free when you
slide the appliance.
A
A
A A
B
A
A
D
N 550 (-0,+1) mm
20
mm
A 767
mm
N 780
mm
A 549 mm
435
mm
A 757
mm
160
mm
170
mm
600 mm
N 762 + 3
mm
~50 mm
4. Use a minimum of 2 screws to attach
the oven on the 2 sides (A).
25
Commentaires sur ces manuels