Electrolux EHS60041P Manuel d'utilisateur télécharger pdf (Page 24)

Scratches or dark stains on the glass

ceramic have no effect on how the ap-

pliance operates.

To remove the dirt:

1. – Remove immediately:melted plas-

tic, plastic foil, and food with sugar. If

not, the dirt can cause damage to the

appliance. Use a special scraper for

the glass . Put the scraper on the

glass surface at an acute angle and

move the blade on the surface .

–

Remove after the appliance is suf-

ficiently cool:limescale rings , water

rings, fat stains, shiny metallic discol-

orations. Use a special cleaning agent

for glass ceramic or stainless steel.

2. Clean the appliance with a moist cloth

and some detergent.

3. At the end rub the appliance dry with

a clean cloth.

WHAT TO DO IF...

Problem Possible cause and remedy

You cannot start the appliance

or operate it.

• You touched 2 or more sensor fields at the same time. Only

touch one sensor field.

• There is water or fat stains on the control panel. Clean the con-

trol panel

•

The child safety device operates

. Stop the function. See

the section “Child safety device”.

• Start the appliance again and set the heat setting within 10

seconds.

The residual heat indicator

does not come on.

The cooking zone is not hot because it operated only for a short

time. If the cooking zone must be hot, speak to the after sales

service.

You cannot switch on the outer

ring.

Switch on the inner ring first.

The appliance stops.

You covered . Uncover the sensor field.

comes on.

• The automatic switch-off operates. Stop the appliance and

start it again.

Overheating protection for the cooking zone operates. Stop the

cooking zone and start it again.

and a number come on.

There is an error in the appliance.

Disconnect the appliance from the electrical supply for some

time. Disconnect the fuse from the electrical system of the house.

Connect again. If

comes on again, speak to the after sales

service.

If you tried the above solutions and cannot

repair the problem, speak to your dealer or

the Customer Care Department. Give the

data from the rating plate, three-digit-letter

code for the glass ceramic (it is in the cor-

ner of the cooking surface) and an error

message that comes on.

If you operated the appliance incorrectly,

the servicing by a customer service techni-

cian or dealer will not be free of charge,

even during the warranty period. The in-

structions about the customer service and

conditions of guarantee are in the guaran-

tee booklet.

24 electrolux

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Electrolux EHS60041P Manuel d'utilisateur Page 24

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Electrolux EHS60041P