Electrolux EHXP8H10KK Manuel d'utilisateur Page 17

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 76
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 16
Problem Possible cause Remedy
The fuse is blown. Make sure that the fuse is
the cause of the malfunc-
tion. If the fuse is blown
again and again, contact a
qualified electrician.
The hob deactivates. There is water or fat stains
on the control panel.
Clean the control panel.
You put something on the
sensor field .
Remove the object from the
sensor field.
One pot activates two
zones.
The pot bottom is uneven. Move the pot slightly until
only one zone is detected.
Two or more zones are de-
tected as one zone.
The pots are too close to
each other and the cooking
zones were not set after
placing each pot.
For every pot set the zone
individually after placing the
pot on the cooking zone.
There is no pot indication
on the flexible zone.
The cookware is incorrect. Use the correct cookware.
Refer to “Hints and tips”
chapter.
The diameter of the bottom
of the cookware is too small
for the zone.
Use cookware with correct
dimensions.
Refer to “Technical informa-
tion” chapter.
There is already cookware
on the zone.
Move the first pot slightly to
make room for the next
one.
Power Boost is not activat-
ing for the pot on the flexi-
ble zone.
The pot is bigger than 240
mm. The maximum power
is reached.
It is normal for this size of
pot. Use smaller pot or use
the highest heat setting for
the big one.
Heat settings for the pots
on flexible zone are re-
duced.
You are using to many pots
with the highest heat setting
on the flexible zone. Power
management function is ac-
tivated.
Move some pots to induc-
tion cooking zones.
comes on.
One of the Lock functions is
active.
To unlock the hob touch
letters in alphabetical order
A - O - X.
Pro Cook function deacti-
vates.
You are using more than
one pot.
Use only one pot for the
function.
ENGLISH
17
Vue de la page 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 75 76

Commentaires sur ces manuels

Pas de commentaire