Electrolux EK5731X Manuel d'utilisateur télécharger pdf (Page 25)

Conversion from Natural to LPG Gas

IMPORTANT

The replacement/conversion of the gas hob should

only be undertaken by a CORGI registered

engineer.

It is important to note that this model is designed for

use with natural gas but can be converted for use with

butane or propane gas providing the correct injectors

are fitted. The gas rate is adjusted to suit.

Method

• Ensure that the gas taps are in the 'OFF' position

• Isolate the hob from the electricity supply

• Remove all pan supports, burner caps, rings, crowns

and control knobs.

• With the aid of a 7mm box spanner the burner

injectors can then be unscrewed and replaced by the

appropriate LPG injectors (see Table: page 19).

TO ADJUST THE GAS RATE

With the aid of a thin bladed screwdriver completely

tighten clockwise the by pass screw. Upon

completion stick the replacement rating plate near the

gas supply pipe.

1 2 ... 20 21 22 23 24 25

Pas de commentaire

Electrolux EK5731X Manuel d'utilisateur Page 25