
• it is not subject to traction or torsion;
• it does not get in touch with cutting edges
or corners;
• it can be easily inspected in order to check
its condition.
The control of preservation of the flexible pipe
consists in checking that:
• it doesn't show cracks, cuts, marks of
burning both on the end parts and on its
full extent;
• the material is not hardened, but shows its
normal elasticity;
• the fastening clamps are not rusted;
• expiry term is not due. If one or more ab-
normalities are seen, do not repair the
pipe, but replace it.
• it cannot come into contact with moveable
parts of the appliance;
• it does not pass through any space sus-
ceptible of becoming congested;
Important! Once installation is complete,
check the perfect seal of every pipe fitting,
using a soapy solution, never a flame.
Adaptation to different kinds of gas
Your cooker is designed to work with natural
gas, propane or butane. It is not designed for
butane or propane air.
Connection to the LPG bottle should be car-
ried out in accordance with the enclosed pic-
ture.
A
B
C
B
D
A) Distributor pipe with nut 1/2 "
B) Gasket
C) Elbow
D) LPG rubber pipe holder
The LPG conversion must be fitted by an au-
thorised Service Engineer.
For changing the gas type it is necessary to:
• replace the nozzles (hob)
• adjust the minimum level (hob)
• check the gas connection
Warning! Stick the label supplied with
the appliance (in the nozzles bag)
corresponding to the gas type utilised.
Hob burners nozzles
Warning! Before replacing the nozzles
ensure that the gas knobs are in OFF
position and disconnect the appliance
from the electrical supply.
Nozzles replacement
1. Remove the pan supports.
2. Extract the caps and the wall baffles of
the burners.
20 electrolux
Commentaires sur ces manuels