Electrolux EKK603504X Manuel d'utilisateur télécharger pdf (Page 37)

electrolux 37

4. with a thin screwdriver, adjust the

by-pass screw (see diagram).

••

• If changing from natural gas 20

mbar/13 mbar to liquid gas, com-

pletely tighten the adjustment screw

in, until a small regular flame is ob-

tained.

••

• If changing from liquid gas to natu-

ral gas 20 mbar, undo the by-pass

screw about 1/4 of a turn, until a

small regular flame is obtained.

••

• If changing from natural gas 20

mbar to natural gas 13 mbar undo

the by-pass screw about 1/4 of a

turn, until a small regular flame is

obtained.

••

• If changing from liquid gas to natu-

ral gas 13 mbar, undo the by-pass

screw about 3/4 of a turn, until a

small regular flame is obtained.

Reassemble the parts following the

same procedure backwards.

Finally, check the flame does not go

out when quickly turning the knob from

the maximum position to the minimum

position.

by-pass screw

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Pas de commentaire

Electrolux EKK603504X Manuel d'utilisateur Page 37