Electrolux GK58TSIPO Manuel d'utilisateur télécharger pdf (Page 11)

Heat setting The hob deacti‐

vates after

3 - 4 5 hours

5 4 hours

6 - 9 1.5 hours

5.3 Using the cooking zones

CAUTION!

Do not place hot cookware

on the control panel. There

is a risk of damage to the

electronic parts.

Place the cookware in the centre of the

selected zone. Induction cooking zones

adapt to the dimension of the bottom of

the cookware automatically.

Once the pot is detected, the heat setting

0 comes on.

You can cook with large cookware

placed on two cooking zones at the

same time. The cookware must cover the

centres of both zones. If the cookware is

located between the two centres, Bridge

function will not be activated.

5.4 The heat setting

Touch the control bar at the desired heat

setting or move your finger along the

control bar to set or change the heat

setting for a cooking zone.

Once you place a pot on the cooking

zone and set the heat setting, it remains

the same for 50 seconds after you

remove the pot. The control bar blinks for

the second half of that time. If you place

the pot on the cooking zone again within

this time, the heat setting reactivates.

Otherwise the cooking zone deactivates.

5.5 Power management

function

• Cooking zones are grouped according

to the location and number of the

phases in the hob. See the illustration.

• Each phase has a maximum

electricity loading of 3680 W.

• The function divides the power

between cooking zones connected to

the same phase.

• The function activates when the total

electricity loading of the cooking

zones connected to a single phase

exceeds 3680 W.

• The function decreases the power of

the other cooking zones connected to

the same phase.

• For cooking zones that have a

reduced power, the control panel

shows the maximum possible heat

settings.

• If a higher heat setting is not available

reduce it for the other cooking zones

first.

• The activation of the function depends

on the number and size of pots.

ENGLISH 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commentaires sur ces manuels

Pas de commentaire