Electrolux EHT9780K Manuel d'utilisateur télécharger pdf (Page 6)

Fig. 5

Fig. 6

IMPORTANT: This appliance can only be

installed and used in permanently ventilated

places in conformity with UNI 7129 and UNI

7131.

Appliance installation and connection to the

power supply must only be carried out by

QUALIFIED PERSONNEL. Before carrying out

any operation, make sure the appliance is

DISCONNECTED from the power supply.

The Manufacturer declines any liability for

possible damage due to installation not

complying with the current standards or

failure to respect the accident-prevention

regulations.

Place of installation

For correct operation of the gas appliance, the air

necessary for gas combustion must be able to flow

naturally in the room. (The installer must comply with the

current standards).

The air must flow into the room through openings made

in the external walls (Fig. 4). These openings must have

a free open section of at least 100 cm

This opening must be located near the floor, preferably

on the opposite side to fume extraction, and be made in

such a way that it is not obstructed from the inside or

outside.

FO 0220

FO 0221

Fig. 4

Technical specifications

Gas burner power

Triple crown burner 3.8 kW

Semirapid burner (medium) 1.9 kW

Auxiliary burner (small) 1.0 kW

Appliance class 3

Category II2H3+

Appliance setting Natural gas G20 / 20 mbar

Gas inlet connection G 1/2"

Power supply

230 V 50 Hz

Dimensions of opening for

fitting

Width 830 mm.

Depth 480 mm.

Instructions for the installer

ELETTROVENTILATORE

ENTRATA ARIA

SEZIONE MINIMA

100 cm

PIU' LA SEZIONE

AGGIUNTIVA

CORRISPONDENTE

ALLA PORTATA

DELL'ELETTRO-

VENTILATORE

FO 0222

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Electrolux EHT9780K Manuel d'utilisateur Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Non Electrolux EHT9780K