
11 ENGLISH
9.3 Installation
Wiring technique and principle:
B
A
C
D
E
Wire Controller
5-terminal Group
Wires here adopts 5-core Shield
Cable,the length should be ac-
cord with the actual conditions.
Installation description:
When it is necessary to use this
controller,it needs to add a small 5-ter-
minal
Group and fasten a infrared emmiter
near to the receiver in the switch board.
Connecting the anode and cathode to A,
B of the Terminal Group, also connect
+5V, GND, RUN of the switch board
separately to the C, D, E of the 5-termi-
nal Group.
Back cover of
Wire Controller
Front cover of
Wire Controller
LCD display
Wire Control
Board
Turning cover
Wood Mounting
Screw (M4X20)
After the back cover is
fastened, to x up the
front cover rst lock
one of the two then the
another.
For the Terminal Group is
standing out of the back
cover, so it is necessary
to obligate holes, and it is
forbiden to fasten directly to
the wall!!
While installing, using Screwdriver or other
tools to open the back cover from the inside
CAUTION!
• The connecting wire should be a little longer as to take away the switch
board easily for maintenance.
• The connecting wire should be a little longer as to take away the controller
easily for maintenance.
Commentaires sur ces manuels